애플리케이션

LS200 3020CM

LS200 3020CM

LS200 3020CM

LS200 3020CM

What kind of products need to choose LS200-3020CM sewing machine?

It is specifically used for reinforcing the seam of the inlet and outlet ports of FIBCs. For sewing big bags which with cross bottom, or say spout rosettes sewing.

Why is it necessary to use Automatic Computerized Pattern Sewing Machine For Spout Rosettes Sewing LS200-3020CM to sew the Spout Rosettes instead of an ordinary sewing machine?

Ordinary sewing machines require manual rotation of the fabric, making it extremely difficult to ensure the concentricity of the circles and the uniformity of the reinforcing stitches. Computerized pattern machines fix the fabric with pneumatic fixtures and are driven by servo motors to move the machine head or fixtures in high-precision X/Y-axis displacements, ensuring that the sewing trajectory and stitch spacing of each reinforcing circle are completely consistent.

What core parameters should be taken into consideration when making a selection?

Sewing range, thickening capacity and bobbin capacity

Can LS200-3020CM automatically cut threads and reinforce them?

Yes. The machine is equipped with a fully automatic pneumatic cutting system and an automatic lifting foot function. At the end of the pattern program, it will automatically perform a back-tack to lock the thread end, and then automatically cut the warp thread and weft thread to prevent thread breakage.

How to replace or modify the pattern design of the mouthpiece?

The existing built-in template parameters can be directly modified through the LCD touch screen.

How many sewing patterns can Automatic Computerized Pattern Sewing Machine For Spout Rosettes Sewing LS200-3020CM store?

Modern industrial computers with special models usually have large-capacity memory, which can store up to 900 different pattern programs. Workers can switch between different programs with just one click.

If the operators are not familiar with computers, will the operation be very difficult?

No. In actual production, after the technicians set the patterns, the ordinary workers only need to follow the prescribed procedures and press the buttons. The control box has a multilingual graphical interface, making it very easy to get started.

What should be done when frequent broken stitches and broken threads occur during the sewing of thick PP woven fabric?

Check if the needle size is correct.

Check if the machine needle has bent due to impact, causing a change in the gap with the shuttle tip.

Since PP material is relatively hard, high-speed sewing can generate frictional high heat, resulting in thread melting. It is recommended to install an air-cooling device for the needle.

How should Automatic Computerized Pattern Sewing Machine For Spout Rosettes Sewing LS200-3020CM be maintained on a daily basis?

Daily cleaning and regular oiling