bag closing machinery

For more detailed information, please see the following:

Names and functions of seal components　

Metal inserts must be carefully prepared in operations involving cleaning and roughening surfaces (grit-blasting or phosphatizing), stamping out parts, application of primer (usually by dipping), and curing of the primer (often by baking for a short time at moderate temperature).³ Primer curing minimizes the possibility of wiping primer off portions of the insert by stock flow during molding. The treated metal inserts must be used within a relatively short time (usually a day or less), so that functionality necessary for bonding is not lost by reaction with moisture in the air. Freshness of the primer surface is particularly important for peroxide-cured and base-resistant fluoroelastomer compounds. Compound formulation should be adjusted to attain good adhesion.

Of course, all rubber materials and seals will provide a range of benefits; however, you will need to consider chemical compatibility, sufficient temperature ranges, pressure ranges, and more. 

internal, external and axial orientation

To diagnose potential problems with the ignition spark plug, there are a few signs to look out for. These include difficulty starting the engine, decreased fuel efficiency, and engine misfires. If you notice any of these symptoms, it is important to have your spark plug inspected and replaced if necessary.

3. Garter Spring

The garter spring is located at the end of the primary sealing lip and used to apply pressure to the sealing lip against the shaft. Common garter spring material types are:

Fundamental things and its importance 

■Anti-wear agents: Anti-wear agents help protect parts of the engine that are especially susceptible to damage from high temperatures, like cylinder walls, lifters, cams, and piston rings. This additive acts as a protective layer around these components to limit friction in metal-on-metal situations.