industrial upholstery sewing machine

Seals are classified by O.D. wall material, lip type, and whether they have a spring or not.
Major oil seals are specified in ISO 6194-1 and JIS B 2402-1.
Table 2 shows the common types of oil seals, while Table 3 shows the features of each type of oil seal.
Table 4 lists the JTEKT oil seal type codes and corresponding ISO and JIS standards.

Shaft Speed - Considering the speed that the shaft will be moving, the runout, the housing bore and the type of oil being sealed is vital to making sure you select an oil seal that will not suffer from abrasions or spiralling.

The square shape of the gasket allows for a more precise fit in square or rectangular openings, ensuring a tight seal to prevent fluids or gases from escaping. Made from high-quality rubber materials such as neoprene, silicone, or EPDM, these gaskets offer excellent resistance to temperature, pressure, and chemical exposure.

use of sealants

Spring seals are the perfect solution when regular seals are unable to produce a leak-proof mating surface. They are the best substitute for sealing applications involving machinery as they are capable of resisting more heat and pressure than other types of seals.

Case study 3: Product changes in oil seals

FKM or FPM, which is in well-known brand Viton™, can withstand higher liquid temperatures of up to 180 ˚C. FKM is highly resistant to strong acids and bases, as well as to synthetic oils and greases. Glycol-based oil and grease, however, can also damage FKM.

PTFE, which is used in the well-known brand Teflon®, is less commonly used, but it is the preferred material for specific rotating seals in the chemical, food and pharmaceutical industries. This material is notable for having a very low frictional resistance and the best chemical resistance. It can also withstand a very wide range of temperatures in these types of seals; -80 ˚C to 200 ˚C. The shafts on which oil seals with PTFE lips are used require a harder and finer finish. Something like an axle sleeve can also be used to meet this requirement.

Common Oil Seal Failure Causes

Standard 3760/3761

There is a British Standard laid down for the control of synthetic rubbers. BS 3574 (1989) helps to determine shelf life – for instance, Nitrile (NBR) and Polyacrylic (ACM) are Group ‘B’ rubbers and have a 7-year life, whilst Silicone (VMQ) and Fluoroelastomers (Viton®) are Group ‘C’ rubbers and have a 10-year shelf life. PTFE and Leather do not come into this category but like the others should be kept in the original packing for as long as possible away from direct light, dust, and humidity. Ozone, which can also be produced by battery-driven forklift trucks has a very bad effect on synthetic rubbers. Finally, protect the sealing lip – DO NOT hang the seals on nails, wire etc.

One option is to buy oil seals from specialised gasket and sealing material companies like Polymer Trade Manufacturing Ltd, which is known for its expertise in dealing with gaskets and o rings. These companies not only offer an extensive range of oil seals but also provide expert advice to help customers select the right sealing materials for their specific requirements.

PTFE Oil Seals - A relatively new and exciting oil seal, the use of polytetrafluoroethylene means that they can withstand dry or unlubricated operations. With a massive thermal range of  -130ºC to +200ºC and a strong resistance to chemicals, they are considered to be the future of rotary shaft seals.

Most effective sealing is obtained with optimum shaft surface finishes. The sealing efficiency is affected by the direction of the finish tool marks and the spiral lead. Best sealing results are obtained with polished or ground shafts with concentric (no spiral lead) finish marks. If you must use shafts with spiral finish leads, they should lead toward the fluid when the shaft rotates.