sewing machine quilt pattern

If the seal is being fitted to original equipment you may have some influence over the shaft and housing bore finish, but if you are replacing a worn seal you still need to take into account the condition of these 2 essential parts. Check for sharp edges and burrs – particularly on the shaft and housing chamfers or you could ruin the seal before you start up. If the shaft is too worn consider using an M Barnwell Services Shaft Repair Kit.

Here are some additional tips that will help you have a successful O-ring installation.

The metal case is the exterior (or frame) of the oil seal, the principal function of which is to give rigidity and strength to the seal. The material of the case must be selected depending on the environment where the seals are to be used. Often the metal case is covered by the same rubber material used in the sealing element, which also helps seal the exterior of the oil seal in the housing bore. Common case material types are:

Lubricant

Beyond the variety of lip designs, oil seals also come in various case designs, each serving a unique role. Here are some of the most common ones:

Dynamic seals called bearing isolators are used to shield bearings from external impurities. They are revolving (rotor) and stationary (stator) elements. O-rings or strong seals are used in some bearing isolators, while they are constructed like labyrinths in others.

Engine Oil Seal:

Today, traditional oil seals have to compete with a new variant oil seal, which is used in most modern engines.

Classical oil seals consist of a metal housing that carries the dynamic sealing lip and provides the static sealing function. These are usually manufactured of elastomer material, such as ACM, Silicone or FPM. Further, since they are in contact with the surface of the rotating shaft, the lip is pressed onto the shaft surface by means of a spring ring.

JTEKT provides special seals for use in a wide variety of machines and applications.
Table 5 lists the major special seals, their shapes, and their features.

DIN    

Repeat the process of installing oil seals for any other locations where they are required. Be sure to follow the same steps for each installation to ensure a leak-free performance.

The temperature range of nitrile is −35° to 120 °C (−30° to 250 °F). Due to this wide range, NBR seals can be used for gas oil, silicone oil, animal/vegetable oils and fat, hydraulic liquid as well as hot and cold water. In addition, NBR is oil resistant and has an excellent abrasion resistance, so for any application that demands shock absorbers, NBR is a perfect choice to go with.