Leather sewing machine

Latest articles



Popular articles

  • The type of presser foot that comes with a sewing machine can make a significant difference in sewing thick materials. Look for machines that offer a range of presser feet, such as walking feet or Teflon feet, specifically designed for heavy fabrics. A walking foot helps to feed multiple layers of fabric evenly, while a Teflon foot glides smoothly over sticky materials like leather or vinyl.


  • Time-Saving Efficiency


  • 4. Material Usage Waste generated during the overlocking process must also be factored into the overall cost. Efficient use of materials can help in minimizing waste and lowering costs.


    overlock machine rate

    overlock
  • - Sealing Requirements Depending on the product contained within the bags, the sealing method may vary. For example, highly sensitive products may require airtight seals to ensure their longevity.


  • Latest articles

  • One of the most important factors to consider when sewing leather is the thickness of the material. Leather can range from thin and supple to thick and heavy, so it's important to choose needles that are appropriate for the type of leather you are working with. Industrial sewing machine needles for leather are typically thicker and stronger than regular needles, allowing them to easily penetrate through the tough material without breaking.

  • Another benefit of using heavy duty thread for sewing leather is its durability. Leather items are often subjected to a lot of wear and tear, so it is important to use a thread that can withstand this. Heavy duty thread is designed to be more resilient than regular sewing thread, so it is less likely to degrade or weaken over time
    heavy
    heavy duty thread for sewing leather. This means that your leather items will stay together longer and look better for longer.

  • Auto sewing refers to the use of advanced robotics and computerized technology to perform sewing operations with minimal human intervention. Traditionally, sewing was a labor-intensive task, relying heavily on skilled workers to produce garments. However, with advancements in artificial intelligence (AI), machine learning, and robotics, auto sewing systems can now replicate these skills with remarkable precision.


  • Links

  • Galvanized

  • Steel mesh factory – improve the crack resistance and shock resistance of concrete. Because of the characteristics of steel mesh, it has good bonding and anchoring performance with concrete, and the load distribution is uniform, which greatly improves the seismic and crack resistance ability of reinforced concrete structure.

  • 5. Dry it with a towel.
  • Now many hardware manufacturers produce iron wire, and iron wire is very easy to rust, if you need to use in outdoor or humid places, generally customers will require the use of galvanized iron wire equipment to give the wire a layer of zinc, the thickness can be determined according to user requirements. Galvanized iron wire equipment is specially used for the plating of iron. Generally speaking, the stability of zinc is much higher than that of iron, and it will not rust in the daily water vapor or damp place.

  • Hot dip galvanized iron wire is made of carbon structural steel, which is processed by drawing and galvanized iron wire. Widely used in the manufacture of wire mesh, highway guardrail and construction projects. It has the characteristics of thick coating, strong corrosion resistance and firm coating. And according to the special needs of users, according to the industry standards to provide various specifications of galvanized wire.

  • Large hexagonal net is called stone cage net, mainly used for mountain protection, hydraulic construction, etc. Small wire hexagonal net is used as a good breeding material, the twisted flower hexagonal net in the welding of the iron frame get on the hexagonal net burning welding coops, pigeonholes, rabbit cages and other cage, hexagonal net is the best breeding material with the net.


  • Post time: 19-07-22
  • galvanized


  • Post time: 16-05-23
  • barbed

  • Raw material of wire mesh sheet cold drawn low carbon steel wire base material can choose low carbon steel hot rolled disk bar or hot rolled smooth steel bar. The base material number and diameter of cold-drawn low carbon steel wire can be confirmed according to the rules in the table below. During the cold drawing process, the surface shrinkage rate of each drawing should not be greater than the wire mesh before cold drawing. Annealing shall not be carried out during wire drawing. If butt welding is required, the same production unit and base material of the same number should be selected. The appearance quality of wire mesh should not affect wire drawing. When the welding function is poor or brittle fracture occurs, special inspection should be carried out according to relevant standards.

  • The use of electric welding mesh is very widely, but also used in different industries, different places, many times the name is named because of the use or use, so the use of electric welding mesh is doomed to a variety of different names. Can be called row welding mesh, or zinc plating welding mesh or galvanized welding mesh. There’s also the outer wall wire, which is just used for insulation, usually placed on the outside of the wall, to reduce heat emission.

  • The different spacing of the thorn rope is mainly in order to save costs to consider, because if they are too close, then obviously a little waste of resources, but the installation is too sparse will not work. Usually the bottom spacing is about 10cm, and the top is up to 20cm, this is because the higher the place is more difficult to climb over, usually more than one meter without the help of tools it is difficult for ordinary people to climb over, and the bottom because of the relatively tight can prevent personnel from drilling in the past.

  • galvanized

  • Surface coating, surface inclusion and other defects can be removed locally from the surface of the deposited layer before galvanized, which can be found and treated by conventional techniques. Excess foam is caused by the introduction of soap and saponable fatty surfactants into the tank. Moderate foam formation rates may be harmless. The presence of a large number of tiny homogenous particles in the tank, which can stabilize the foam layer, mat with activated carbon to remove surface active substances, or make the foam less stable through filtration, are effective measures.

  • Twisting the barbed wire: twisting the barbed wire in the opposite direction of the main wire. That is, it’s not twisted in one direction. This is called the twisted cord.

  • 2. To avoid galvanized iron wire being gripped by tools like pliers or hardened claws, when the wire suffers from tension or bending stress, scoring or pooping on the surface can lead to damage.
  • Electro