leather hand stitcher

Latest articles



Popular articles

Latest articles

Links

  •  

  • The Essential Guide to Braided Hose Crimping Tools


  • Applications of PTFE Stainless Steel Braided Hoses


  • - Automotive and Aerospace In fuel systems, as well as hydraulic and brake lines that require reliable and high-performance hoses.

  • Since hose may change in length from +2% to -4% under the surge of high pressure, provide sufficient slack for expansion and contraction.
    Never use a bending radius less than the minimum shown in the hose specification tables. The bending radius of the hose should be far away from the hose fitting (A＞1.5R)
    Hose bending radius is bigger when it is in motion.
    Choose proper fittings, avoid twisting in hose lines bent in two planes.
    Avoid twisting in hose by use clamp properly.
    Hose should not be twisted, hose is weak when installed in twisted position. Also pressure in twisted hose tends to loosen fitting connections. Design so that machine motion produces bending rather that twisting.
    Leave proper length when the hose in connected
    Choose proper fittings, avoid too small bending radius and excess force.
    Choose proper fittings, avoid excessive hose length.
    Reuse friction, avoid hose touching the object directly or far away from the object.
    Hose Active Working Pressure Working Life
    As shown , when active working pressure in 1.25 times recommended working pressure, the hose working life is only half of i under working in recommended working pressure.
    Store Conditions of the Assembly.
    1.If possible, the storing temperature range is within 0-30 ℃. During storing, temperature should not exceed 50℃
    2.The storing areas can not place equipment within can produce ozone.For example mercury vapour lamp, high voltage electric device and other equipment which can produce spark or set out electricity.
    3.Can not be placed with erosive products or exposed over gas-volatile on these products.
    4.Far away from heat source and equipment which can produce electric field or magnetic field
    5.Avoid sunshine or strong artificial light source
    6.Avoid to touch the sharp objects or the ground
    7.Guarantee against rodent attacking.
    8.Observe the rule of “First in, then first out”

  • PTFE stainless steel braided hoses are utilized in various applications across multiple industries. Some common uses include


  • 1. 1% High Pressure Hoses A hose rated for 1% high pressure typically indicates that the hose can handle pressures slightly above atmospheric levels, often used in applications requiring light-duty operation. These hoses may be used in situations where precision and careful handling of fluids are essential, such as laboratory settings or low-pressure hydraulic systems.


  • 1. Inner Tube The inner tube is made of oil-resistant synthetic rubber, providing excellent resistance to the fluids being transported. This layer is crucial as it directly interacts with the hydraulic fluid.


  • Benefits of Braided Hose


  • Hand crimpers are particularly valued for their portability and ease of use. Unlike larger hydraulic crimping machines, hand crimpers can be operated manually, making them ideal for on-site repairs and installations. This mobility allows technicians to efficiently handle maintenance tasks in various environments, such as construction sites, automotive workshops, and agricultural fields.


  • ポリエアホース（poly air hose）は、さまざまなにしたでのあるホースとして、やのでくされています。に、エアコンプレッサー、スプレーガン、エアツールなどのをするにおいて、そのはにいです。


  • Importance of a Quality Steam Cleaner Hose


  • Benefits of Using Rubber Airline Hoses


  • Importance of a Quality Steam Cleaner Hose


  • The design of high pressure propane lines must adhere to strict regulatory standards to ensure safety and efficiency. This includes the appropriate sizing of the pipes, using components like valves, regulators, and fittings that can handle the pressures involved, and ensuring proper installation techniques are followed. Any failure in these systems can lead to significant safety hazards, including leaks, fires, or explosions.


  • The Importance of Hydraulic Oil Hoses


  • - Power Steering Systems They are also used in power steering systems, where high pressure is common. The flexibility and strength of braided hoses ensure smooth operation and control.


  • Understanding Hydraulic Hoses for Brake Lines Importance and Selection


  • Bảo trì và thay thế ống điều hòa không khí là việc cần thiết để hệ thống điều hòa hoạt động hiệu quả. Người dùng nên thường xuyên kiểm tra và vệ sinh hệ thống, chú ý đến những dấu hiệu bất thường. Nếu phát hiện ra vấn đề, hãy đưa xe đến các trung tâm sửa chữa chuyên nghiệp để được kiểm tra và khắc phục kịp thời.


  • Common Applications


  • Proper maintenance of sandblast rubber hoses is crucial to ensure optimal performance and safety. Routine inspections should be conducted to check for signs of wear, kinks, or cracks. Keeping the hoses clean and free of abrasive materials is also essential to prolong their lifespan.


  • A high pressure steam hose pipe is specifically designed to convey steam at high pressures and temperatures. These hoses are typically made from durable materials that can withstand the harsh conditions associated with steam transfer. Common materials used include rubber, thermoplastic, and reinforced synthetic fibers. Reinforcement with steel wire or braided materials is often necessary to handle the pressure and prevent bursting.


  • 고무 호스는 다양한 산업 분야에서 널리 사용되는 필수적인 도구 중 하나입니다. 그 중에서도 3/4인치 호스는 특히 유용한 크기로, 여러 용도와 상황에서 효과적으로 사용됩니다. 이번 글에서는 3/4인치 고무 호스의 특징, 장점 및 활용 범위에 대해 알아보겠습니다.


  • يعمل مصنع الخرطوم المضفر باستمرار على الابتكار والتطوير، من خلال البحث والتطوير لتحسين الأداء وزيادة الكفاءة. يستثمر المصنع في أحدث التقنيات والمعدات لتلبية احتياجات السوق المتزايدة. كما أن التعاون مع الخبراء في مجال المواد والهندسة يساهم في تطوير منتجات جديدة تلبي احتياجات الصناعات المختلفة.


  • Stainless braided oil lines are engineered to handle high-pressure scenarios effectively. The stainless steel braiding reinforces the hose, allowing it to withstand the intense pressures generated in high-performance engines and hydraulic systems. This capability reduces the risk of leaks or ruptures, which can lead to catastrophic failures or costly downtime in machinery. For applications involving turbochargers, superchargers, or high-performance racing, these lines are indispensable.


  • Understanding High Pressure Steam Hose Pipes


  • Pump suction hoses play a critical role in various industries, serving as the vital link between a pump and the liquid source it draws from. These hoses are specifically designed to handle the suction side of a pump operation, ensuring that fluids are transported efficiently and safely. Their strength, flexibility, and material composition make them suitable for a wide range of applications, from agricultural irrigation to industrial fluid transfer.


  • Maintenance Tips


  • 1. Пайдалануунун жеңилдиги Портативдүү аба компрессорунун шлангы жеңил салмакта болот, бул аны колдонуу жана ташуу үчүн ыңгайлуу кылат. Ар кандай шарттарда, анын ичинде унааларда, курулуш алаңдарында же уюмдук иш-чараларда оңой эле колдонууга мүмкүндүк берет.


  • 3. Outer Cover The outer layer is made from weather-resistant synthetic rubber, protecting the inner layers from external factors like UV light, abrasion, and various chemicals. This cover is essential not only for durability but also for safety, as it helps prevent leaks and ruptures.


  • 1. Ajustement parfait


  • 3. Performance améliorée


  • 1. Inspection Regularly inspect hoses for signs of wear, cracking, or any other damage. Look for bulges or soft spots which could indicate internal damage.


  • 1. รอยแตกร้าวหรือเสียหาย หากท่อยางเบรกมีรอยแตกหรือสัญญาณของการเสื่อมสภาพ เช่น สึกกร่อนหรือมีรอยด่าง มีโอกาสสูงที่น้ำมันเบรกจะรั่วไหล


  • Conclusion