Big bag sewing machine

Latest articles



Latest articles

  •  

  • Finally, start the engine and monitor for any signs of leakage around the newly installed gasket. If done correctly, your LR4 should now be free from any oil leaks related to the valve cover gasket, ensuring a cleaner running engine and peace of mind for the driver.
  • Figure 2.11. Rubber enclosed metal seal

  • As type C with dust lip

  • By following these steps, you can easily change the spark plugs in your vehicle and keep it running efficiently. It is recommended to change the spark plugs every 30,000 to 50,000 miles, or as recommended by your vehicle manufacturer. Remember, regular maintenance is key to prolonging the life of your vehicle and preventing costly repairs down the road.
  • With a helper holding the engine steady, remove the wedge supports, lower the engine and reconnect the mountings loosely.

  • The basic principle of an oil seal is fairly straightforward. It is installed adjacent to the bearing, with the flexible lip against the rotating shaft and the casing pressed into the housing to hold the seal in place. It’s important that the sealing lip is lubricated to prevent it from overheating as a result of any generated friction. It’s also crucial to understand which type of seal is appropriate for your particular machinery. Before selecting your seal, consider the environment, temperature, pressure and shaft speed of your machine, as well as the type of medium the seal will come into contact with during operation. These considerations will all determine the size, colour, and type of lip material or sealing element to choose, and whether it can be sealed in or sealed out.