what is the double needle with sewing machine for

CS

 Oil seals go by many names, such as shaft seals, dirt seals, grease seals, lip seals, and many other variations of these. They are essentially simple devices used in rotary shaft equipment to prevent lubricant from escaping and for excluding contaminants such as dust, dirt and water. An oil seal’s most important function, however, is that it protects every type of ball, sleeve and roller bearing in the rotating shafts. The seals also prevent the integration of two different fluids that shouldn’t mix, such as oil and water.

OIL SEAL

The sizes of industrial oil seals typically range from 0–33cm. These varieties are designed for temperature fluctuations. If your seal matches the intended equipment, the machine will perform optimally.

Under the action of the skeleton oil seal, the rigidity of the oil film just makes the oil film and the air contact end form a crescent surface, which prevents the leakage of the working medium and realizes the sealing of the rotating shaft. The sealing ability of the oil seal depends on the thickness of the oil film on the sealing surface. If the thickness is too large, the oil seal will leak; if the thickness is too small, dry friction may occur, causing the oil seal and shaft to wear; if there is no oil film between the sealing lip and the shaft, it is easy to cause heat and wear. . Therefore, when installing, it is necessary to apply some oil on the sealing ring, and at the same time ensure that the skeleton oil seal is perpendicular to the axis line. If it is not perpendicular, the sealing lip of the oil seal will drain the lubricating oil from the shaft, which will also lead to excessive sealing of the lip. wear. During operation, the lubricant in the casing seeps out a little, so that it is ideal to form an oil film on the sealing surface.

The hydrodynamic ribsa) have a two-stepped rib configuration provided in one direction on the air face of the lip. Even if the first rib is worn out, the second rib comes into contact with the shaft surface, meaning that this type of oil seal ensures higher sealing performance. Seal with Side Lip A large side lip ensures prevention of entry of dust/water.

Temperature - Just like pressure, the temperature that your oil seal will be operating in must be known so that you can choose one that can withstand the heat or cold. PTFE have the widest range of temperature, making them useful for machines who can see usage in extreme weather or elements.

ERIKS also supplies the types GR and GRST. These are virtually identical to the types R and RST, except in this case the metal inner ring is also completely encased in rubber. ERIKS uses FKM rubber here as standard, so these seals are ideal for use in acidic environments.